Ionpure VNX55HH EDI module

0.00

The VNX55-HH module is designed with proven Ionpure® continuous electrodeionization (CEDI) technology to produce high purity water. The internal design has been optimized to handle a high feed water hardness while still able to provide ultrapure water quality water at high flow rate required for many applications, specifically within the power industry.

Categories: ,

Features

  • Typically > 16 MΩ-cm product water resistivity
  • 2 ppm (as CaCO3) max feed water hardness
  • In most cases can operate on single-pass RO permeate
  • Resin, membrane and module construction optimized for feed water hardness tolerance
  • No need for acid/caustic, neutralization systems or tank exchanges
  • Significantly lower operating cost compared to conventional ion exchange systems
  • Robust leak-free sealing with through-port gasket
  • Continuous production of consistent quality
  • Junction box for convenient and safe power connections

Quality Assurance

  • CE marked.
  • Each module is factory tested to meet strict industry standards.
  • Manufactured in an ISO 9001 and ISO 14000 quality and environmental management system.

Options

Flexible to meet your needs

  • Power supplies
  • Power controllers
  • Earth plugs
  • Connectors
  • Systems

Applications

  • Power Industry

Specifications

Specifications VNX55HH
Shipping weight 276,7 kg
Operating weight 374,2 kg
Diameter 445 mm
Height 2130 mm
Wide 508 mm
Depth 508 mm
Minimum flowrate 4,5 to 5,2 m3/h
Nominal flowrate 10 to 11,4 m3/h
Maximum flowrate 12,6 to 14,1 m3/h
Typical Performance
Product Quality
Product Resistivity 1-pass RO >16 MΩ.cm*
Sodium (Na+) Removal >99,5 %
Chloride (CI-) Removal >99,8 %
Silica (SiO2) Removal >90 %
* Actual performance may be determined on projection from DeionX.
Operating Parameters
Recovery 80 – 90 %
DC Voltage 0 – 600 VDC
DC Amperage 0 – 13,2 Amp
Pressure Drop Range at Nominal Flow 0,7 – 7 bar
Maximum Feedwater Specifications
Feed water conductivity equivalent, including CO2 and Silica < 40 µS/cm
Feed water source RO permeate
Temperature min to max 5 to 45 ⁰C
Inlet pressure 1,4 – 7 bar
Maximum Free chlorine (as CI) < 0,02 ppm
Iron (as Fe) < 0,01 ppm
Manganese (as Mn) < 0,01 ppm
Sulfide (S-) < 0,01 ppm
PH 4 – 11
Total hardness (as CaCO3) > 2,0 ppm
Dissolved organics (TOC as C) < 0,5 ppm
Silica (SiO2) < 1,0 ppm

Downloads & Pictures

IP-VNX55HH-2 W3T324118 IonPure EDI module