EDI Modules

Showing all 8 results

  • BloX 20 EDI m3h stack

    BloX20 EDI modules

    0.00

    BloX20 EDI modules

    BloX20 EDI modules are electrodeionization (EDI) modules which use electrical current to deionize and polish reverse osmosis (RO) permeate water. The product water for the BloX20 modules is at an Ultrapure level required in today’s demanding applications.

    Categories: ,
    0.00
  • E-Cell MK-3 & 3X EDI stack

    E-Cell MK-3 & 3X Stack EDI

    0.00

    E-Cell MK-3 & 3X Stack EDI

    E-Cell MK-3 and 3X stacks are electrodeionization (EDI) stacks which use electrical current to deionize and polish reverse osmosis (RO) permeate water. The product water for the MK-3 is at an Ultrapure level required in today’s most demanding applications.

    SKU: N/A Categories: ,
    0.00
  • E-Cell MK-3 MiniHT & Mk-3P

    E-Cell MK-3 MiniHT E-Cell MK-3 PharmHT

    0.00

    E-Cell MK-3 MiniHT E-Cell MK-3 PharmHT

    E-Cell MK-3MiniHT and MK-3PharmHT stacks are hot water sanitizable EDI stacks which use electrical current to deionize and polish reverse osmosis (RO) permeate water. The product water quality for the system is at greater than USP quality levels required in today’s Pharmaceutical applications.

    SKU: N/A Categories: ,
    0.00
  • Ionpure LabXT EDI modules

    Ionpure LabXT EDI modules

    0.00

    Ionpure LabXT EDI modules

    These series of modules are designed with proven continuous electrodeionization (CEDI) technology. Performance of these modules have been optimized to provide ultrapure water for a wide range of laboratory and very low flow applications. LabXT‘s nominal flow rates from 3 to 15 lph allowing for simple and effective system design to reduce overall capital cost. With the design of the LabXT modules, end-users with a EMD Millipore Elix® system can extend the life of their system by utilizing LabXT as a direct replacement to the Elix module for maintenance and service of existing Elix systems.

    SKU: N/A Categories: ,
    0.00
  • Ionpure LX EDI Module main deionx.com

    Ionpure LX EDI modules

    0.00

    Ionpure LX EDI modules

    SKU: N/A Categories: ,
    0.00
  • Ionpure MX series EDI modules

    Ionpure MX EDI modules

    0.00

    Ionpure MX EDI modules

    The Ionpure® MX Series modules are designed with proven continuous electrodeionization (CEDI) technology. Performance on these modules has been optimized to produce high purity water for laboratory and smaller scale applications. A wide nominal flow range from 30 – 500 litres per hour increases the applicability for single module installations.

    SKU: N/A Categories: ,
    0.00
  • Ionpure EDI Module main deionx.com

    Ionpure VNX EDI modules

    0.00

    Ionpure VNX EDI modules

    SKU: N/A Categories: ,
    0.00
  • Iontech EDI Module main deionx.com

    Iontech EDI modules

    0.00

    Iontech EDI modules

    The Iontech® industrial modules generate mixed bed deionized water through electrodeionization and are specifically designed for industrial applications. Iontech® modules consistently deliver maximum reliability and superior performance without regeneration downtime. Iontech modules can be used as a one on one replacement for the Ionpure LX modules.

    SKU: N/A Categories: ,
    0.00